The tilt platform has simple controls, and, after thorough instruction, is easy to operation by means of push buttons on the Dead Man Control. In addition, safety feature of Counter Balance Valve is equipped into the Tipper Platform hydraulic system to create back-pressure at the return line of the actuator to prevent losing control over the load.
Specification:
Model |
NST-TP80 |
|
System Capacity |
80T |
|
Tipping Angle |
0˚ - 40˚ |
|
Platform Size |
Length (mm) |
18m |
Width (mm) |
3m |
|
Platform Lifting Time (0˚ - 40˚) |
6 to 7 minutes |
|
Hydraulic Cylinder System |
||
Type |
Front End Cylinder Type |
|
Lifting Cylinder (nos) |
2 nos |
|
Cylinder Size |
Ø 362mm |
|
No. of Stages |
5 stages |
|
Max. Working Pressure (bar) |
200 bar |
|
Cylinder Extend Speed |
1 meter/ minute |
|
Power Pack |
||
Motor |
Three-Phase AC Induction Motors |
|
22kw (30HP) 4 Poles |
||
1468rpm / 415V / 3PH / 50Hz |
||
Gear Pump |
Hydraulic Gear Pump |
|
Control Valve |
24VDC NG10 Solenoid Operated Directional Control Valve |
|
Oil Tank |
500 litres oil tank c/w accessories |
|
Safety Features |
Control Balance Valve Dead-Man Control with Button |